rodndtube.com's (OLD) MyPaipoBoards Forums. Reading but no posting on the OLD forums. Forum Index rodndtube.com's (OLD) MyPaipoBoards Forums. Reading but no posting on the OLD forums.
The (NEW) MyPaipoBoards Forums have moved to a new site. New registration is required.

Click on the link below:
About the Forums - Read Me!
 
   {MyPaipoBoards Home}MyPaipoBoards Home  FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups     RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 


another spoon

 
This forum is locked: you cannot post, reply to, or edit topics.   This topic is locked: you cannot edit posts or make replies.    rodndtube.com's (OLD) MyPaipoBoards Forums. Reading but no posting on the OLD forums. Forum Index -> Paipo Board Design & Building
View previous topic :: View next topic  
Author Message
mrmike



Joined: 06 Sep 2007
Posts:
Location: coronado, ca
PostPosted: Wed Jan 13, 2010 6:11 pm    Post subject: another spoon Reply with quote
I am working on another plywood spoon because danger woman baught my other one this is birch ply on this one. It will be done next week sometime I will sent pic's when done. It is 48" long 22" at the nose and 18" at the tail MRMIKE Cool

_________________
PAIPO ON
blog http://mrmikespaipos.blogspot.com
Back to top
View user's profile Send private message Send e-mail
Soulglider



Joined: 04 Feb 2008
Posts:

PostPosted: Wed Jan 13, 2010 7:20 pm    Post subject: daC Reply with quote
looks great! i think you need more clamps. Wink
_________________
soulglider
http://soulgliderpaipo.blogspot.com
Back to top
View user's profile Send private message
OG-AZN



Joined: 27 Jul 2009
Posts:
Location: Norcal
PostPosted: Wed Jan 13, 2010 10:36 pm    Post subject: Reply with quote
Nice board Mike. What did you use for the edge piece? Is that some kind of re-purposed molding or did you pre-shape the piece before you glued it up? Also, could you post a photo of the rail profile on that board when it's finished? Thanks.
Back to top
View user's profile Send private message
mrmike



Joined: 06 Sep 2007
Posts:
Location: coronado, ca
PostPosted: Wed Jan 13, 2010 11:05 pm    Post subject: Reply with quote
the edge piece started out a 1/4 sheet of 5/8" thick birch ply cut and shaped then glued to the bottom. the rails will be shape last. diamond shape like this <> 2/3 on top with 1/3 on the bottom. this board cost me sofar $23 for 1/4 sheet of 5/8 birch ply and the bottom is also 1/8" birch ply at $11 some glue and sandpaper $5 and varnish about 1/4 qt about $5. for less then $50 you have a nice spooney.( you could use regular ply for $10 less but why, birch is so much nicer MRMIKE Cool
_________________
PAIPO ON
blog http://mrmikespaipos.blogspot.com
Back to top
View user's profile Send private message Send e-mail
mrmike



Joined: 06 Sep 2007
Posts:
Location: coronado, ca
PostPosted: Sun Jan 17, 2010 10:56 am    Post subject: Reply with quote
here is the finished board. I will surf today MIKE Cool


_________________
PAIPO ON
blog http://mrmikespaipos.blogspot.com
Back to top
View user's profile Send private message Send e-mail
mrmike



Joined: 06 Sep 2007
Posts:
Location: coronado, ca
PostPosted: Sun Jan 17, 2010 7:08 pm    Post subject: Reply with quote
surfed it today, it is like rideing on of sheet of paper. took some big hits very flexable did not break I think I will keep this one MRMIKE Very Happy
_________________
PAIPO ON
blog http://mrmikespaipos.blogspot.com
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
This forum is locked: you cannot post, reply to, or edit topics.   This topic is locked: you cannot edit posts or make replies.    rodndtube.com's (OLD) MyPaipoBoards Forums. Reading but no posting on the OLD forums. Forum Index -> Paipo Board Design & Building All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


MyPaipoBoards Forums is an online community constructed by paipoboarders for paipoboarders.
The forum is hosted and maintained by rodndtube.com.
Powered by phpBB 2.0.23 © 2001, 2002 phpBB Group :: Spelling by SpellingCow.